Polyair - Thermo Reflective Products

Bradford Polyair™ is a range of thermo reflective insulation products that reduce radiant heat gain in roofs and walls. The products can be used in a range of residential applications, commercial applications and in sheds.

Overview
Polyair Performa XHD
Polyair Performa

Bradford Polyair Performa

Polyair Performa is a high grade radiant heat barrier that can boost the thermal performance of roofs and walls , improving the comfort and energy efficiency of a structure.

Polyair Performa 1

Polyair Performa is a multi layered thermo reflective insulation product. Its special antiglare coated foil reflects up to 91% of the sun’s radiant heat while the foam inner core and inward facing foil reduces heat transfer through the product.

Polyair Performa 2

Specifications Table

  Thickness (mm) Roll Size (m x mm) m2 Per Roll (m2) Roll Diameter (mm) Roll Weight (kg) Product Code
Performa 4.0 4 20 x 1350 27 380 9 118113
4 40 x 1350 54 500 14 123974
Performa 7.0 7 30 x 1350 40.5 600 18 123691

Classifications

PROPERTY REFERENCE RESULT
Emittance AS/NZS 4201.5:1994/ASTM E408 Double-sided reflective
Antiglare Face E0.09
Silver Face E0.03
Material thermal resistance ASTM C518 0.1m² K/W Performa 4.0
0.2m² K/W Performa 7.0
Resistance to dry delamination AS/NZS 4201.1:1994 Pass
Resistance to wet delamination AS/NZS 4859.1 (App I) Pass
Surface corrosion AS/NZS 4859.1 (App I) Pass
Fire – BCA Classification AS/NZS 3837:1998 Group 1
Flammability index AS 1530.2 Low (≤5)
Early fire hazard Indices AS/NZS 1530.3  
Ignitability AS/NZS 1530.3 0
Spread of flame AS/NZS 1530.3 0
Heat evolved AS/NZS 1530.3 0
Smoke developed AS/NZS 1530.3 0-1

Polyair Performa 3

Total R-Value Performance:

Flat Metal Roof Flat Metal Roof
Metal roof 1° pitch Metal roof 1° pitch
15mm airspace (generic spacer) 60mm airspace (Ashgrid spacer)
Bradford Polyair Performa 7.0 Bradford Polyair Performa 4.0
(with slight dust cover) (with slight dust cover)
Min 300mm non-ventilated airspace Min 300mm non-ventilated airspace
13mm plasterboard ceiling 13mm plasterboard ceiling
   
Heat flow in (summer) = RT3.2 Heat flow in (summer) = RT3.5
Heat flow out (winter) = RT1.3 Heat flow out (winter) = RT1.3

Get your system calculated by our technical team.
Contact 1300 760 233 or complete our ENQUIRY FORM

Total R-Value Assumptions

The contribution of Polyair to a Total R-Value depends on the installation and environmental conditions. The Total R-Value will be reduced in the event of the accumulation of dust on upward facing surfaces and in those cavities that are ventilated. Thermal calculations are based on Australian parameters and in accordance with AS/NZS 4859.1:2002/Amdt.1. The contribution of Polyair towards the Total R-Value depends on installation and environmental conditions. For upward facing surfaces of horizontal or sloping reflective insulation in non-vented cavities where no special precautions for prevention of dust ingress have been included, the Total R-Value is calculated based on an emittance for the case of dust cover in accordance with AS/NZS4859.1 Paragraph K3.2(a)(ii), unless otherwise stated. For calculation purposes, the air gaps are assumed as still parallel air gaps unless otherwise stated and the membrane continuous.

Polyair Unicell
Polyair Unicell White