Thermoseal Firespec and Facing Foils

Bradford Thermoseal

Bradford Thermoseal offers a wide range of facing foils that provide an additional layer of reflective insulation on glasswool products.

Thermoseal Firespec

Bradford Thermoseal Firespec is an extra heavy duty, single-sided reflective foil and woven e-glass fabric laminate, suitable for use where a vapour barrier and water barrier membrane is required on the external side of the building frame. Firespec is suitable for use where a non-combustible sarking-type material is specified in accordance with the National Construction Code (NCC). This product is suitable as either a wall wrap or roof sarking, and may be used in BAL regions for additional protection.

Features and Benefits

  • Firespec is suitable for use where sarking-type materials are specified in non-combustible applications in accordance with the NCC
  • Suitable for use in BAL zones 12.5 to FZ
  • Meets the requirements of NCC2019 Volume 1 Section C1.9 (e)(vi) and Volume 2 Section 3.7.1.1, as well as NCC 2016 Vol.1 C1.9(e) (vi)
  • Firespec is a Class 2 vapour barrier and water control membrane, and is recommended for use in NCC climate zones 1 to 5
  • Firespec can contribute a reflective R-value when the low-emissivity foil surface is positioned adjacent to an air-cavity

Applications

Bradford Thermoseal Firespec is suitable for use in non-combustible construction in accordance with the National Construction Code (NCC). This product is classified as a Class 2 vapour barrier and is recommended for use in climate zones 1 to 5 where the use of a vapour barrier product will not increase the risk of condensation. Please refer to the Product Technical Statement on this site for additional application information,

Specifications

Width
(mm)
Length
(m)
m2 per
roll
Rolls per
pallet
Product 
Code
1500 30 45 104 164674

Find out more:

Light Duty Facing (729)
Medium Duty Facing (730)
Heavy Duty Facing (750)
Heavy Duty Perforated Facing (750PERF)
Heavy Duty Pliable Facing (756)