SpacerX Roof Spacer System
Fastest Roof Spacer for Concealed Fixed Roofs
Fasten clip and spacer directly to the purlin with only 3 screws
SpacerX Roof Spacer System
Fast Start and Fast Finish
Custom designed Start Blocks that can be quickly lined up and aligned to the roof sheet line to start. Just over-lap to finish, no need to shorten spacers with a grinder to finish the roof.
SpacerX Roof Spacer System
Quickly Connects and Self-Aligns
No clipping or locking required to securely and quickly connect spacer bars, and SpacerX bars will always self-align.
SpacerX Roof Spacer System
Fastest Roof Spacer for Concealed Fixed Roofs
Fasten clip and spacer directly to the purlin with only 3 screws
SpacerX Roof Spacer System
Fast Start and Fast Finish
Custom designed Start Blocks that can be quickly lined up and aligned to the roof sheet line to start. Just over-lap to finish, no need to shorten spacers with a grinder to finish the roof.
SpacerX Roof Spacer System
Quickly Connects and Self-Aligns
No clipping or locking required to securely and quickly connect spacer bars, and SpacerX bars will always self-align.
SpacerX Roof Spacer System
Bradford SpacerX is a patented roof spacer system for concealed fixed roofs. SpacerX improves speed of construction by allowing the spacer and the concealed roof clip to be assembled with only 3 screws per 700mm bar (screws not included).
Suitable for non-cyclonic commercial roofing applications, SpacerX is available in 4 sizes; 40mm, 60mm, 80mm and 120mm to suit the full range of Anticon roofing blankets to help achieve the required BCA total roof system R-Value. SpacerX is sold as an easy-to-carry pack of 10 with no cardboard packaging waste.
See why SpacerX is the fastest roof spacer system
-
Fastest Roof Spacer for Concealed Fixed Roofs
Less Crane Lifts onto the Roof and Easier to Carry off the Pallet
SpacerX is compact for storage and delivers more lineal metres of spacer per pallet than any other system on the commercial roofing market. Lightweight and compact, without any cardboard packaging, SpacerX can be effortlessly carried for laying onto the roof.
Lineal Metres Per Pallet
Sizes SpacerX Ashgrid Roof RazorTM Roof Rack® Aldeck J-Clip ≤80mm 630 403 216 336 280 425 ≥110mm 630 345 216 336 280 338 Quickly Connects and Self-Aligns
No clipping or locking required to securely and quickly connect spacer bars. SpacerX can be inserted easily into the previous bar to connect, and will always self-align to previous bar.
Vertical, Centre Fix on Top Face for Fasteners
Pre-punched holes and slots are centred on the top profile, which means direct access for the drill, and the fastener can be fixed directly to the purlin at no angles and reduce risk to miss the purlin.
Only 3 Screws to Fasten Clip and Spacer Directly to the Purlin
SpacerX can be fastened to the purlin along with the concealed clip with 1 set of screws altogether, requiring around half the number of fasteners compared to other concealed roof systems on the market. SpacerX is also versatile and can accommodate 5 concealed fixed roofing profiles:
- Apex Apdeck 700
- Fielders KingKlip®
- Lysaght Klip Lok 700 hi-strength®
- Metroll Metlok® 700
- Stramit Speed Deck Ultra®
SpacerX Ashgrid Roof Razor™ Roof Rack® Aldeck Fasteners per lineal metre* 4.3 7.6 9.3 8.6 10 * Based on manufacturer's instructions for installation of non-cyclonic systems
Fast Start and Fast Finish
Starting a run of SpacerX is easy with custom designed Start Blocks that can be quickly lined up and aligned to the roof sheet line, even non-parallel fascia roofs. Finishing is also easy as SpacerX can just be over-lapped without the need to shorten spacers with a grinder to finish the roof.
- Which Concealed Fixed Roof clips can I use
- Installation time comparison
- Ordering information
- How to Install?
