Anticon Roofing Blanket
Acoustic, thermal and condensation control for commercial roofing
Anticon Roofing Blanket
Anticon is available with a range of facing materials to suit a variety of applications, including vapour impermeable options for condensation control.
Anticon Roofing Blanket
Acoustic, thermal and condensation control for commercial roofing
Anticon Roofing Blanket
Anticon is available with a range of facing materials to suit a variety of applications, including vapour impermeable options for condensation control.
Anticon™
Create rel="noopener noreferrer" a spec with our thermal roofing calculator.Bradford Anticon™ is foil-faced insulation blanket specifically designed for temperature & noise control in homes and buildings with metal roofs.
It is comprised of a glasswool blanket adhered to an impermeable reinforced reflective foil facing. This reduces radiant heat entering a home during summer, and helps prevent condensation in winter.
- Overview
- Applications
- Facing selection for your project
-
Specifications
Bradford Anticon™ is available in a variety of thicknesses and facings to suit your project needs.
Available Facings
- Reflective Foil Laminate (RFL) – reflective facing foil, specifically designed to act as a vapour control layer and contribute a reflective air-gap R-Value. Available in various duty grades; Light (LD), Medium (MD) and Heavy (HD).
- Antiglare (AG) – Antiglare foil facing specifically developed for use in the northern States of Australia. These products have an antiglare foil installed in an upwards direction to allow installation in direct sunlight, available in Medium (MD) and Heavy (HD).
Specifications
Product Material R-Value1 Thickness (mm) Width (mm) Length (m)2 Facing Anticon 60 R1.3 60 1200 or 1400 15 or 20 (LD, MD, HD) LD, MD, HD, AG MD or HD Anticon 80 R1.8 80 1200 15 LD, MD, HD, AG MD or HD Anticon 100 R2.3 100 1200 10 LD, MD, HD, AG MD or HD Anticon 100 HP3 R2.5 100 1200 10 LD, MD, HD Anticon 110 R2.5 110 1200 10 LD, MD, HD Anticon 130 R3.0 130 1200 10 LD, MD, HD, AG MD or HD Anticon 140 R3.3 140 1200 7.5 LD, MD Anticon 145 R3.6 145 1200 7.5 LD, MD Notes: 1 Material R-value refers to the base Glasswool blanket only, as tested in accordance with AS/NZS4589.1. The overall system or total R-value is dependent on the type of construction. For guidance on full system performance refer to the DesignSmart On-Line calculator at www.bradfordinsulation.com.au/designsmart or the ICANZ Thermal Insulation handbook available from www.bradfordinsulation.com.au or contact your Bradford office.
2 Custom cut-to-length (CTL) are available by request to reduce waste and installation time.
3 HP- Bradford Anticon High Performance Roofing Blanket is a higher density 14kg/m3 Glasswool blanket is specified in applications similar to Bradford Anticon roofing blanket, but where roof space is limited and a thinner, higher performing insulation blanket is needed to achieve the required R-value.
