Want just a wrap, or the right wrap? Enviroseal is the wrap builders choose.

Enviroseal™ is the right wrap to control condensation and is suitable for use behind both brick veneer and lightweight clad walls. Enviroseal™ is classified as a water barrier and is a vapour permeable wall wrap in accordance with AS/NZS 4200.1.

Looking for advice? 1800 354 044
Interested? Where to buy
Use our wall wrap selectorSend me a sample pack

Uncover the facts:

Bradford Enviroseal can be used behind Brick Veneer and all Lightweight Clad systems, including, James Hardie™, Weathertex, Cemintel® and Hebel® products.

Fact: Bradford Enviroseal is compatible with all of the external wall systems listed below.

Enviroseal exceeds the membrane specification published in the James Hardie documentation for use with these cladding systems: As per the Weathertex cladding installation manual, Enviroseal is a recommended vapour permeable membrane product for all Weathertex external wall systems, including: Enviroseal is compatible with Cemintel cladding products including: As per the Hebel Design and Installation Guide, Enviroseal is compatible with the following facades:
Scyon™ Stria™ Cladding
Scyon™ Matrix™ Cladding
Scyon™ Linea™ Weatherboard
Scyon™ Axon™ Cladding
PrimeLine® Weatherboard
PanelClad® Sheet
HardieTex™ Blue Board System
HardiePlank® Weatherboard
HardieFlex™ Sheet
ExoTec® Facade Panel
EasyLap™ Panel
ComTex® Fixing System
Selflok Texwood
Selflok Old Colonial Smooth
Selflok Millwood
Selflok Millwood Ruff
Selflok Ecogroove Woodsman
Selflok Ecogroove Smooth
Primelok Woodsman
Primelok Smooth
Primelok Shadowood Smooth
Primelok Ruff Sawn
Primelok Federation Smooth
Primelok Federation Ruff
Classic Smooth
Classic Rusticated Smooth
Classic Rusticated Ruff
Classic Ruff Sawn
Commercial Express Panel®
Scarborough® Weatherboard
Endeavour® Weatherboard
Woodgrain Plank
Surround™ Cladding
Territory™ Cladding
Aspect Cladding®
Cladding Sheet
Edge Cladding
Headland® Weatherboard
Commercial Rendaline®
Power Panel
Power Panel XL

Fact: Enviroseal is highly vapour permeable with high water hold-out

Bradford Enviroseal is water barrier ‘high’ and vapour barrier ‘low’ making it compliant with all external lightweight cladding.

Fact: James Hardie specification compliant

AS/NZS4200.1 requirement is ≥ 0.14 µg/N.s (low)

Vapour Barrier LOW
in accordance with AS/NZS4200.1

Fact: James Hardie specification compliant

AS/NZS4200.1 requirement is is 100mm (high)

Vapour Barrier HIGH
in accordance with AS/NZS4200.1

send me info pack

The Enviroseal info pack includes product samples and information to help you choose a high-performing, compliant wrap for your next cladding job.

Please enter email address in all lowercase, e.g. you@gmail.com

Find your nearest Enviroseal stockist or search by postcode.

Call us on   1800 354 044 for advice.