Bradford offers a range of rockwool products specifically designed for non-combustible, general purpose industrial applications where fire and thermal properties are required. These products are ideal for use to insulate tanks, vessels and larger process equipment from energy loss and to provide personnel protection.

Fibertex 350
Fibertex 450
Fibertex 650
Fibertex 820

Bradford Fibertex 820 (unfaced) is a high density, non-combustible Rockwool bulk insulation product.

Bradford Fibertex 820 high density rockwool insulation product with thermal and acoustic insulation, and fire resistance properties. It is manufactured by spinning a molten mixture of natural rock and recycled products into fine wool like fibres which are bonded together using a thermosetting resin. The product can be identified by its light brown appearance.

Features and Benefits

  • Highly durable insulation product
  • Cost effective high temperature insulation
  • Performance is not adversely effected from contact with water
  • Non-combustible (un-faced products only)
  • Biosoluble safe to use product

Applications

Fibertex 820 is ideal for use in process temperature control, energy conservation, condensation prevention, acoustic absorption treatment and personnel protection from plant and equipment. Typical applications include:

  • lightweight furnace lining
  • fire rated bulkheads and deck-heads
  • boilers
  • eat exchangers
  • reactors
  • ovens
  • kilns
  • autoclaves
  • large diameter piping

Bradford Fibertex 820 is easily installed by impaling the batts or blankets on weld pins and securing with speed clips. Please note because of the semi-rigid nature of Fibertex 820, it does not easily conform to curved surfaces.

The un-faced surface of the Rockwool Batt or Blanket is to be applied to the hot surface to be insulated.

Specifications

Board 

Thickness
(mm)
Length
(mm)
Width
(mm)
Pieces per
pack
Nominal m2
per pack
25 1200 600 12 8.64
50 1200 600 6 4.32
75 1200 600 4 2.88


Blankets

Thickness
(mm)
Length
(mm)
Width
(mm)
Pieces per
pack
Nominal m2
per pack
25 4000 600 2 4.8
50 4000 600 2 4.8
75 4000 600 1 2.4


Strips

Thickness
(mm)
Length
(mm)
Width
(mm)
Pieces per
pack
Lineal metres
per pack
13 750 225 60 45

Standard packaging is polythene bags
Note not all sizes are held in stock. Some are subject to minimum order quantities
Published weights are for product only and do not include packaging
Share
General purpose industrial insulation for use on process equipment, vessels, tanks and reactors. It is a light duty thermal and acoustic insulation suitable for continuous operation up to 350°C.

Contact us by phone, or online form. We'll answer your questions.