Bradford Gold Ceiling Insulation
Bradford Gold ceiling insulation can reduce your energy bills for heating and cooling by up to 45%.
Uninsulated homes can lose up to 35% of the heat through the ceilings in winter and around the same amount of heat can also enter in during summer. Bradford Gold ceiling insulation batts acts as a thermal barrier to slow down temperature change to the inside of your home, keeping you and your family comfortable for longer.
Play it smart with Bradford Gold
- Made for Australian conditions
- Reduces heat transfers in your home
- Improved comfort all year round
- Saves on energy costs
- Reduces greenhouse gas emissions
- Low allergen
- Meets the highest Australian insulation standards
- 70 year performance warranty
- Environmentally sound, made from up to 80% recycled glass
- 100% bio-soluble
- Non combustible
- Backed by CSR - serving Australia since 1855
- Bradford is Australia's most trusted insulation company for 80 years
Gold Hi Performance insulation was installed to achieve high levels of thermal comfort and energy efficiency.
See more on The Block.
-
What R-Value is best for you?
What R-Value is best for your home?
The Building Code of Australia (BCA) has outlined energy efficiency provisions for new homes which include the inclusion of insulation in ceilings, walls and some floors. The value of insulation required to meet the deemed-to-satisfy provisions for energy efficiency are intended to be seen as a minimum standard – not best practice.
Step 1. Determine your climate zone from the map below.
Climate Zones
Zone 1: High humidity summer, warm winter
Zone 2: Warm humid summer, mild winter
Zone 3: Hot dry summer, warm winter
Zone 4: Hot dry summer, cool winter
Zone 5: Warm temperate
Zone 6: Mild temperate
Zone 7: Cool temperate
Zone 8: Alpine
Climate zones affect the levels and type of insulation. The purpose of the insulation, whether it be to keep the heat in or out (or both) will affect the R-Value required. As a general rule, climates that need to keep the heat in, require higher R-Values.
Check out Step 2 for the minimum R-Value to comply.
Need a closer look at your state?
QLD | NSW | VIC | TAS | SA | WA | NTFor a free measure and quote to determine what insulation is suitable for you, call us on 1300 760 233 or complete the get a quote form.
Note that other provisions within the BCA, such as a reduction in ceiling area insulated due to the installation of recessed down lights or other fixtures, may affect the level of insulation required. Similarly, to meet the deemed-to-satisfy provisions in the BCA other measures for energy efficiency, such as glazing requirements, must also be met.
