Martini - Acoustic Polyester
Martini acoustic polyester products offer a wide range of solutions for commercial projects, from wall and ceiling insulation for reducing noise transfer between areas, to decorative absorptive panels to help reduce reverberation and improve the acoustic comfort of a space.
-
Martini MAB
Martini MAB is a multi-purpose insulation, made to specific densities and thicknesses. MAB has many varied acoustic applications. It comes in a range of densities from 11kg per m3 to 60 kg per m3 and thickness from 25 mm to 100 mm. It is available in roll and sheet form.
For product and sales support please call 1300 760 233 or send our team an email by clicking EMAIL ENQUIRY
Application
This product is made for applications where density and thickness is specified.
Martini MAB can be used for:
- Suspended ceilings
- Plasterboard partition walls
- Rigid ducting
- Industrial applications
Fire Resistance
Test Method Results Variations marked # are assessed to AS/ISO 9705 Group 1 The following results were obtained when CSR Martini product was
subjected to early fire hazard testing in accordance with Australian Standards. AS 1530.3.Ignitability 0
Spread of Flame 0
Heat Evolved 0
Smoke Developed 0-1
Specification Table - Rolls
Product Density kg/m3 Thickness (mm) Length (mm) Width (mm) Rolls per pack m2 per pack Product Code (White) MAB 11/25 11 25 25 610 2 30.5 131695 MAB 11/50 11 50 15 610 2 18.3 130446 MAB 11/75 11 75 15 610 2 18.3 127414 MAB 11/100 11 100 10 610 2 12.2 131697 MAB 11/110 11 110 10 610 2 12.2 141275 MAB 14/25 14 25 25 610 2 30.5 131698 MAB 14/50 14 50 15 610 2 18.3 131699 MAB 14/75 14 75 10 610 2 12.2 131700 MAB 14/100 14 100 10 610 2 12.2 131701 MAB 18/25 18 25 20 610 2 24.4 141276 MAB 20/25# 20 25 25 610 2 30.5 131702 MAB 20/50# 20 50 8 610 2 9.7 131703 MAB 20/75 20 75 10 610 2 12.2 131704 MAB 20/100 20 100 7 610 2 8.5 131705 MAB 32/25# 32 25 25 610 2 30.5 131706 MAB 32/50# 32 50 10 610 2 12.2 131707 MAB 32/75 32 75 6 610 2 7.3 131708 ># Denotes compliant to AS 3837, assessed to AS/ISO 9705, achieved Group 1
Martini MAB is also available in other densities and thickness upon request and is subject to minimum order quantities. Please contact CSR Martini for further details.Specification Table - Sheets
Product Density kg/m3 Thickness (mm) Length (mm) Width (mm) Sheets per pack m2 per pack Product Code (White) MAB 11/25 11 25 2400 1200 12 34.5 131954 MAB 11/50 11 50 2400 1200 6 17.2 131955 MAB 11/75 11 75 2400 1200 4 11.5 131956 MAB 11/100 11 100 2400 1200 3 8.6 131957 MAB 14/25 14 25 2400 1200 12 34.5 130549 MAB 14/50 14 50 2400 1200 6 17.2 130550 MAB 14/75 14 75 2400 1200 4 11.5 130551 MAB 14/100 14 100 2400 1200 3 8.6 130552 MAB 20/25# 20 25 2400 1200 12 34.5 130553 MAB 20/50# 20 50 2400 1200 6 17.2 130554 MAB 20/75 20 75 2400 1200 4 11.5 130555 MAB 20/100 20 100 2400 1200 3 8.6 130556 MAB 32/25# 32 25 2400 1200 12 34.5 130562 MAB 32/50# 32 50 2400 1200 6 17.2 130563 MAB 32/75 32 75 2400 1200 4 11.5 130564 MAB 32/100 32 100 2400 1200 3 8.6 131674 MAB 48/25# 48 25 2400 1200 10 28.8 130566 MAB 48/50# 48 50 2400 1200 6 17.2 131958 MAB 48/75 48 75 2400 1200 4 11.5 131959 MAB 48/100 48 100 2400 1200 3 8.6 131960 MAB 60/25# 60 25 2400 1200 8 23.0 131971 MAB 60/50# 60 50 2400 1200 6 17.2 131972 MAB 60/75 60 75 2400 1200 4 11.5 131973 MAB 60/100 60 100 2400 1200 3 8.6 131974 # Denotes compliant to AS 3837, assessed to AS/ISO 9705, achieved Group 1
Environmental benefits
Martini MAB is manufactured from thermally-bonded polyester fibre with up to 80% recycled fibre content from post-consumer PET packaging, such as empty drink bottles.
- No chemicals or resin binders are used in manufacture.
- Odourless.
- No waste is generated in manufacture.
- No water or ozone-depleting gases are used in manufacture.
- No chlorides are present in the product.
- Suitable for use in Green Star™ projects.
