Enviroseal ProctorWrap Wall Wrap

The Bradford range of Enviroseal ProctorWrap wall wrap products can provide a number of benefits to a structure to make it more comfortable to be in and reduce the risk of condensation formation which can lead to mould.

Wall wraps are pliable building membranes that are applied to the outside of the building frame and offer benefits and protection during construction, as well as when the structure is complete.

The benefits of wrapping
Wall Wrap Selection Guide
Permeability Performance Comparison
Features and Benefits
Managing the risk of condensation
Enviroseal ProctorWrap Accessories

Enviroseal ProctorWrap tapes are designed to complement the Enviroseal products by offering high initial tack and excellent long term adhesion properties.

Where required and specified in the product Installation Guide, it is always recommended that only Enviroseal™ ProctorWrap™ tapes are used with Enviroseal™ ProctorWrap™ products to ensure maximum performance and protection.

Specifications

Product Width
(mm)
Length
(m)
m2
per roll
Items per
carton
Product Code
Enviroseal ProctorWrap HighTack Tape 60 25 1.5 10 155170
Enviroseal ProctorWrap Black Label Tape 60 25 1.5 8 117687
Enviroseal ProctorWrap Duo Tape 24 50 1.2 48 121430
Enviroseal ProctorWrap SLS Flexi Tape 60 5 0.3 10 117688
Enviroseal ProctorWrap PlastiGrip Washer 1000 136770

Enviroseal ProctorWrap Black Label Tape

Enviroseal ProctorWrap Black Label TapeEnviroseal ProctorWrap Black Label vapour permeable construction membrane.

Designed specifically for use on open joint facades, sealing around doors, windows and pipes, Enviroseal ProctorWrap SLS BL Tape can also be used as a repair tape for any accidental rips or tears that may occur to the membrane material. Enviroseal ProctorWrap SLS BL Tape provides an exceptionally high initial grab, even in high humidity areas.

Enviroseal ProctorWrap Duo Tape

Enviroseal™ ProctorWrap™ SLS Duo Tape is a double sided aggressive adhesive tape with a high initial grab and flexible carrier.  

It is ideal for use as a positioning and temporary attachment method between vapour permeable construction wraps and building frames during construction.

Enviroseal™ ProctorWrap™ SLS Duo Tape is not designed as a permanent attachment method and must be replaced by battens or cladding fasteners within a suitable time frame to prevent degradation by wind. Application of Enviroseal™ ProctorWrap™ SLS Plain Tape or Black Label Tape is recommended for all lap joints once the vapour permeable membrane is in place.

Enviroseal ProctorWrap HighTack Tape

Enviroseal ProctorWrap High Tack TapeEnviroseal ProctorWrap HighTack Tape is a single sided aggressive adhesive tape with a high initial grab and flexible carrier.

 It is ideal for use as an air and water tight seal on RW, CW & HT-R vapour permeable construction membranes and as a vapour barrier around pipes, windows, overlaps and penetrations. (Refer to SLS Black Label tape for Enviroseal™ ProctorWrap™ Black Label vapour permeable membrane).

Enviroseal™ ProctorWrap™ HighTack Tape has good ageing resistance, long term flexibility and resistance to plasticizer migration. It is free of solvents, chlorine and formaldehyde. The elasticity of the ProctorWrap HighTack Tape copes well with limited building movement and thermal expansion.

Suitable for use with:

  • PA, PE, PP films (smooth, light rough)
  • Aluminum foils
  • Fleece
  • OSB (Oriented strand board)
  • Coated timber
  • Chipboard
  • Plastics
  • Paperboards
  • Kraft papers
  • Wood
  • Glass
  • Metal

Enviroseal ProctorWrap SLS Flexi Tape

SLS Flexi tape is an extremely elastic butyl tape with a creped stretchable carrier and slit release liner for interior and exterior (behind cladding) air and watertight sealing.

SLS Flexi is ideal for sealing water, air and wind tight penetrations, as the tape can be pre-folded along the slit liner and then easily be adjusted to seal around penetrations. SLS Flexi is suitable for use in open joint façade applications with Black Label, but it should be noted that it is grey in colour and may become visible through the open façade joints in some applications.

Suitable for use with:

  • PA, PE, PP films
  • Aluminum foils
  • OSB (Oriented strand board)
  • Coated timber
  • Chipboard
  • Plastics
  • Paperboards
  • Kraft papers
  • Wood
  • Glass
  • Metal
  • Painted Timber
  • Particleboard

Features & Benefits

  • Extremely elastic
  • Waterproof
  • Solvent, chlorine and formaldehyde free
  • Good resistance to plasticizer migration

PlastiGrip Washer

Enviroseal ProctorWrap Plasti-Grip WasherPlasti-Grip washers are ideal for high wind environments or steel frame applications where a combination of screw and washer provide a more evenly distributed load on the membrane (suitable for all membranes).

Specifications